Posts Tagged ‘Servo Sequencer’

New Servo Sequencer

七月 27, 2011 2 留言

About the TK05 Project. The New MT ( MicroTech ) Servo Sequencer have been release. I have got three of the New Servo Sequencer. Two for the Sequencer for the TK05.
The SQ spec.
Power 電源 : 5v
Size 尺寸 : 51.28 x 33.57 mm
The Thickness 最厚部份尺寸 : 7.8mm
Signal 輸出訊號 : 0-30 腳 (PWM) (0.5ms – 2.5ms) 支援 31顆伺服馬達
Can support 31 Servo
Communication 通訊協定 : RS232
Controller support 控制支援 :
Direct support PS2 Adapter with wireless joystick
直接支援 PS2 Adapter 接無線遙桿
Support JVC & NEC TV IR code
支援接收 JVC 及 NEC 紅外線電視遙控器


Remake the miniBO-02 demo for the primary school

四月 15, 2011 發表留言

this is a demo robot for selling my product to the primary school,

the miniBO-02 using parts below:

Standard Parts

4pcs – ProGear BL806 Robot Servo

2pcs – ProGear CA-01 C-mount

1pc – MT-SC21SQ

1pc – Infrared receiver

1pc – learn Infrared Remote

1pc – 7.4v LiPo Battery

Other Parts

1pc – Sandwich Box

some of custom Parts


for the program, it is just need to program the Servo Sequencer with the Infrared Code (photo right hand side), it is easy for the primary student.

The Final Test of TK04 TorreóN

四月 8, 2011 發表留言


finish the monitor & receiver mounting for the TK04 TorreóN. The TK04 Project will be stop at the moment. If have any update for this project , will be update ASAP.

The next job is repair the TK03 first, at the last month, TK03 have drop on the floor around 1m height. some of the parts are broken. also I have decide to replace the Kondo KHR-3HV foot on the TK03, & beautiful the cable routing for the TK03.

& remake the demo unit ( 4 servo Robot ) for the primary school.

then will be start the Project TK05.

this is the draft for the TK05. before TK05 project start, may be have some re-edit design for the Parts & the outlook.


TK04 TorreóN Test on the Road

四月 4, 2011 2 留言

TK04 TorreóN Test on the Road

四月 3, 2011 發表留言

TK04 TorreóN – Camera Test

三月 29, 2011 發表留言

TK04 TorreóN Program Test – Turn Left & Turn Right

三月 28, 2011 發表留言
%d 位部落客按了讚: