彙整

Posts Tagged ‘C-Mount’

TK05 Gemini – Finish all electronics & brush parts

十二月 3, 2011 2 留言

TK05 ProGear – project status.

  • finish all brush parts
  • finish all electronics connections
  • have been test PS2 controller
  • have been program some of the action. example : walk front , walk left , walk right.
  • Future update with program :

    example : walk back , fight , shoot ball ,

TK05 DMP – project status.

  • finish all brush parts
  • finish all electronics connections
  • have been test PS2 controller
  • will start programming :

    example : walk front , walk left , walk right , fight , shoot ball , ( jump ?)
    IMG_0561
    IMG_0563 IMG_0562
廣告

Finish the TK05 Gemini ( ProGear )

十一月 11, 2011 發表留言

Yesterday just finish brush all the parts & finish the electronics part for the TK05 ProGear.

IMG_0473 IMG_0451
  inside the body

about electronics part, TK05 is different then TK03 or TK04.

TK05 didn’t have ArmBoard inside, TK05 just have a MT-SC31SQ ( pdf file ), The MT-SC31SQ direct support the PS2 Adapter ( pdf file ), So I can direct control all the action with the wireless PS2 joystick. Also the programming is easy then before, No C programming. You just need you mouse click the servo angle, servo speed & save it at any location.

below have a walk video, I just program it in 5 mins.

Today , a new parts make in the factory have been received.

The PC-02 Carbon Plate, it is make with 1mm thick Carbon sheet. Also the PC-02 is support with ProGear BL806 Robot Servo & RoBoard RS-1270 Robot Servo. Below have some sample.

IMG_0475 IMG_0476
IMG_0477 IMG_0481
install it at TK05 ProGear install it with the RoBoard RS-1270

IMG_0482IMG_0483_resize

IMG_0484 IMG_0486

The new Robot Servo RoBoard RS-1270

六月 24, 2011 發表留言

A new robot servo RS-1270 come in my stock. Servos are make in Tai Wan DMP Electronics Inc. The Servo is good for make a human robot.
The Servo Spec:
Coreless servo motor
Digital 4096 with steel gear and 2 ball bearings
Back-horn design
Weight: 70g
Size : 40.4 x 20.1 x 40.3 (mm)
Torque force: 35.0 kg-cm@7.4V / 486.0 oz-in@7.4V
Speed: 0.11 sec/60 degrees
Voltage: 6.0 ~ 7.4 V, suggested 7.4V

20110624-101050.jpg

20110624-101101.jpg

I just test my servo C-mount CA-01, it is can be fix with the RoBoard RS-1270.

The Servo Price : USD$80 ( not include shipping charge )
Need a quotation with shipping charge? Send me a E-mail : bloodkeith@digi-tech.com.hk

中港澳地區的朋友們也可給我電郵訂購啊:bloodkeith@digi-tech.com.hk

The Final Test of TK04 TorreóN

四月 8, 2011 發表留言

 

finish the monitor & receiver mounting for the TK04 TorreóN. The TK04 Project will be stop at the moment. If have any update for this project , will be update ASAP.

The next job is repair the TK03 first, at the last month, TK03 have drop on the floor around 1m height. some of the parts are broken. also I have decide to replace the Kondo KHR-3HV foot on the TK03, & beautiful the cable routing for the TK03.

& remake the demo unit ( 4 servo Robot ) for the primary school.

then will be start the Project TK05.

this is the draft for the TK05. before TK05 project start, may be have some re-edit design for the Parts & the outlook.

TK05

TK04 TorreóN Test on the Road

四月 4, 2011 2 留言

TK04 TorreóN Test on the Road

四月 3, 2011 發表留言

TK04 TorreóN – Camera Test

三月 29, 2011 發表留言
%d 位部落客按了讚: