Archive for the ‘Servo’ Category

TK05 Gemini ( Twins ) – Photo update

十月 20, 2011 發表留言

TK05 Gemini ( Twins ) – continue

九月 21, 2011 發表留言

New Servo Sequencer

七月 27, 2011 2 留言

About the TK05 Project. The New MT ( MicroTech ) Servo Sequencer have been release. I have got three of the New Servo Sequencer. Two for the Sequencer for the TK05.
The SQ spec.
Power 電源 : 5v
Size 尺寸 : 51.28 x 33.57 mm
The Thickness 最厚部份尺寸 : 7.8mm
Signal 輸出訊號 : 0-30 腳 (PWM) (0.5ms – 2.5ms) 支援 31顆伺服馬達
Can support 31 Servo
Communication 通訊協定 : RS232
Controller support 控制支援 :
Direct support PS2 Adapter with wireless joystick
直接支援 PS2 Adapter 接無線遙桿
Support JVC & NEC TV IR code
支援接收 JVC 及 NEC 紅外線電視遙控器


Want to start TK05 Project

七月 25, 2011 發表留言

At this month, my job make me crazy & busy, that didn’t have many time to do my TK05 Project. But I still have some mins to test with the legs design of TK05 Gemini ( Twins ).
I ask my friend Peter help me make a new Aluminum Sheet Metal ( AP-02 ) for testing. It is good with his CNC work. 





Attached some of the photo for the TK05 testing legs. The AP-02 is a sheet metal can link up two Servo. It can work with ProGear BL806 & the RoBoard RS-1270.

The new Robot Servo RoBoard RS-1270

六月 24, 2011 發表留言

A new robot servo RS-1270 come in my stock. Servos are make in Tai Wan DMP Electronics Inc. The Servo is good for make a human robot.
The Servo Spec:
Coreless servo motor
Digital 4096 with steel gear and 2 ball bearings
Back-horn design
Weight: 70g
Size : 40.4 x 20.1 x 40.3 (mm)
Torque force: 35.0 kg-cm@7.4V / 486.0 oz-in@7.4V
Speed: 0.11 sec/60 degrees
Voltage: 6.0 ~ 7.4 V, suggested 7.4V



I just test my servo C-mount CA-01, it is can be fix with the RoBoard RS-1270.

The Servo Price : USD$80 ( not include shipping charge )
Need a quotation with shipping charge? Send me a E-mail :


The Final Test of TK04 TorreóN

四月 8, 2011 發表留言


finish the monitor & receiver mounting for the TK04 TorreóN. The TK04 Project will be stop at the moment. If have any update for this project , will be update ASAP.

The next job is repair the TK03 first, at the last month, TK03 have drop on the floor around 1m height. some of the parts are broken. also I have decide to replace the Kondo KHR-3HV foot on the TK03, & beautiful the cable routing for the TK03.

& remake the demo unit ( 4 servo Robot ) for the primary school.

then will be start the Project TK05.

this is the draft for the TK05. before TK05 project start, may be have some re-edit design for the Parts & the outlook.


TK04 TorreóN Test on the Road

四月 4, 2011 2 留言
%d 位部落客按了讚: