Archive for the ‘PS2 Adapter’ Category

SF01L Spider Robot Limited Can be sell?

四月 2, 2012 發表留言

TK05 的製作暫時要先放在一旁,因有另一計劃要先完成。

SF01L 量產六足計劃,由 BloodKeith 設計,繼續使用 Dr.Victor 所開發的控制板,MT-SC31SQ 及 PS2 Adapter,加上由 CNC 之王 Peter 製作的亞加力膠機身及腳部組件,再配合已作量產的 ProGear CA-01 C-Mount 鋁製工廠零件及 PC-02 Servo 相連機構組件的碳纖維板。


SF01L 價格待定,敬請留意發售日期及地點。

SF01L Spider Robot

Continue Programming – TK05 ProGear

十一月 19, 2011 發表留言

I have dismatle all the parts of TK05 DMP, it will be going to brush the color next week.

TK05 ProGear still continue programming the action, The New MT-SC31SQ is easy to use, I will be draw a schematic later.

The Program of TK05, Now can walk front, walk left, walk right,

& I have test a special program today , fast start action , slow end the action, it is no really soft start soft end.

Finish the TK05 Gemini ( ProGear )

十一月 11, 2011 發表留言

Yesterday just finish brush all the parts & finish the electronics part for the TK05 ProGear.

IMG_0473 IMG_0451
  inside the body

about electronics part, TK05 is different then TK03 or TK04.

TK05 didn’t have ArmBoard inside, TK05 just have a MT-SC31SQ ( pdf file ), The MT-SC31SQ direct support the PS2 Adapter ( pdf file ), So I can direct control all the action with the wireless PS2 joystick. Also the programming is easy then before, No C programming. You just need you mouse click the servo angle, servo speed & save it at any location.

below have a walk video, I just program it in 5 mins.

Today , a new parts make in the factory have been received.

The PC-02 Carbon Plate, it is make with 1mm thick Carbon sheet. Also the PC-02 is support with ProGear BL806 Robot Servo & RoBoard RS-1270 Robot Servo. Below have some sample.

IMG_0475 IMG_0476
IMG_0477 IMG_0481
install it at TK05 ProGear install it with the RoBoard RS-1270


IMG_0484 IMG_0486

The Final Test of TK04 TorreóN

四月 8, 2011 發表留言


finish the monitor & receiver mounting for the TK04 TorreóN. The TK04 Project will be stop at the moment. If have any update for this project , will be update ASAP.

The next job is repair the TK03 first, at the last month, TK03 have drop on the floor around 1m height. some of the parts are broken. also I have decide to replace the Kondo KHR-3HV foot on the TK03, & beautiful the cable routing for the TK03.

& remake the demo unit ( 4 servo Robot ) for the primary school.

then will be start the Project TK05.

this is the draft for the TK05. before TK05 project start, may be have some re-edit design for the Parts & the outlook.


TK04 TorreóN Test on the Road

四月 4, 2011 2 留言

TK04 TorreóN Test on the Road

四月 3, 2011 發表留言

TK04 TorreóN – Camera Test

三月 29, 2011 發表留言
%d 位部落客按了讚: