彙整

Archive for the ‘MT-SC31SQ’ Category

SF01L Spider Robot Limited Can be sell?

四月 2, 2012 發表留言

TK05 的製作暫時要先放在一旁,因有另一計劃要先完成。

SF01L 量產六足計劃,由 BloodKeith 設計,繼續使用 Dr.Victor 所開發的控制板,MT-SC31SQ 及 PS2 Adapter,加上由 CNC 之王 Peter 製作的亞加力膠機身及腳部組件,再配合已作量產的 ProGear CA-01 C-Mount 鋁製工廠零件及 PC-02 Servo 相連機構組件的碳纖維板。

整個計劃便是香港首次,六足機械人生產計劃,而且已在進入測試及製作說明書的階段。

SF01L 價格待定,敬請留意發售日期及地點。

SF01L Spider Robot

廣告

TK05 Gemini – Finish all electronics & brush parts

十二月 3, 2011 2 留言

TK05 ProGear – project status.

  • finish all brush parts
  • finish all electronics connections
  • have been test PS2 controller
  • have been program some of the action. example : walk front , walk left , walk right.
  • Future update with program :

    example : walk back , fight , shoot ball ,

TK05 DMP – project status.

  • finish all brush parts
  • finish all electronics connections
  • have been test PS2 controller
  • will start programming :

    example : walk front , walk left , walk right , fight , shoot ball , ( jump ?)
    IMG_0561
    IMG_0563 IMG_0562

Continue Programming – TK05 ProGear

十一月 19, 2011 發表留言

I have dismatle all the parts of TK05 DMP, it will be going to brush the color next week.

TK05 ProGear still continue programming the action, The New MT-SC31SQ is easy to use, I will be draw a schematic later.

The Program of TK05, Now can walk front, walk left, walk right,

& I have test a special program today , fast start action , slow end the action, it is no really soft start soft end.

Finish the TK05 Gemini ( ProGear )

十一月 11, 2011 發表留言

Yesterday just finish brush all the parts & finish the electronics part for the TK05 ProGear.

IMG_0473 IMG_0451
  inside the body

about electronics part, TK05 is different then TK03 or TK04.

TK05 didn’t have ArmBoard inside, TK05 just have a MT-SC31SQ ( pdf file ), The MT-SC31SQ direct support the PS2 Adapter ( pdf file ), So I can direct control all the action with the wireless PS2 joystick. Also the programming is easy then before, No C programming. You just need you mouse click the servo angle, servo speed & save it at any location.

below have a walk video, I just program it in 5 mins.

Today , a new parts make in the factory have been received.

The PC-02 Carbon Plate, it is make with 1mm thick Carbon sheet. Also the PC-02 is support with ProGear BL806 Robot Servo & RoBoard RS-1270 Robot Servo. Below have some sample.

IMG_0475 IMG_0476
IMG_0477 IMG_0481
install it at TK05 ProGear install it with the RoBoard RS-1270

IMG_0482IMG_0483_resize

IMG_0484 IMG_0486

%d 位部落客按了讚: