主頁 > ProGear BL806 Robot Servo, Robot Design, Servo, 機械人, 機械人製作 > Use SEM-R0001 with the ProGear BL806 – solution 1

Use SEM-R0001 with the ProGear BL806 – solution 1

For the ProGear BL806 , it have got both AXLE , usually we still have to make the aluminum servo mount for the servo , but I have two more easy solution to build the servo mount for the ProGear BL806 ,

SANY0084_resize First , we have to prepare the tools ,
1. a 8mm drill ,
2. a cutter ,
3. a 45 degree drill ,
SANY0072_resize we can see that the SEM-R0001 plastic servo mount is not enough long for the ProGear BL806 , it is not a problem .
SANY0073_resize use the cutter , cut the SEM-R0001 servo mount at the middle , make it be separate .
SANY0075_resize
SANY0077_resize use the 45 degree drill make the hole have a 45 degree cutting , it can include a 2mm screw ,
SANY0078_resize use the 8mm drill for make the plastic hole bigger , then it can fix at the ProGear BL806 .
SANY0079_resize then use a aluminum plank with 6 hole & 6 pcs 2mm screw , fix & join back the SEM-R0001 together ,
SANY0080_resize
SANY0082_resize SANY0083_resize Finish
廣告
  1. 仍無迴響。
  1. No trackbacks yet.

發表迴響

在下方填入你的資料或按右方圖示以社群網站登入:

WordPress.com Logo

您的留言將使用 WordPress.com 帳號。 登出 / 變更 )

Twitter picture

您的留言將使用 Twitter 帳號。 登出 / 變更 )

Facebook照片

您的留言將使用 Facebook 帳號。 登出 / 變更 )

Google+ photo

您的留言將使用 Google+ 帳號。 登出 / 變更 )

連結到 %s

%d 位部落客按了讚: