The Final Test of TK04 TorreóN

 

finish the monitor & receiver mounting for the TK04 TorreóN. The TK04 Project will be stop at the moment. If have any update for this project , will be update ASAP.

The next job is repair the TK03 first, at the last month, TK03 have drop on the floor around 1m height. some of the parts are broken. also I have decide to replace the Kondo KHR-3HV foot on the TK03, & beautiful the cable routing for the TK03.

& remake the demo unit ( 4 servo Robot ) for the primary school.

then will be start the Project TK05.

this is the draft for the TK05. before TK05 project start, may be have some re-edit design for the Parts & the outlook.

TK04 TorreóN Test on the Road

TK04 TorreóN Test on the Road

TK04 TorreóN – Camera Test

TK04 TorreóN Program Test – Turn Left & Turn Right

TK04 TorreóN – Programming Test

Walk Left & Walk Right

TK04 TorreóN Transform Car Mode

Robot TK04 TorreóN test walk forward

TK04 TorreóN – Start Programming

Complete all mechanical works for the TK04 TorreóN

I have been designed & made the first parts CA-01 for the ProGear BL806 Robot Servo. This C-mount design by me & manufacture at the factory. I have waiting a long time of this CA-01 for complete my TK04 TorreóN.

	C-Mount CA-01, material : aluminum 7075 Aluminum thick : 1.5mm color : 1. aluminum (Original) 2. Red (Oxidation)
	the CA-01 include two black washer,   Red (Oxidation) – HKD$35 / each aluminum (Original) – HKD$28 / each CA-01 user manual – PDF

now I just need to play attendtion for program the TK04 TorreóN, to complete it ASAP.